REQUIREMENTS FOR BRINGING AN INDUSTRIAL X-RAY UNIT INTO MAINE

Before bringing the x-ray unit into the State of Maine each owner/user must:

  1. Complete and submit to the Radiation Control Program the registration form with the proper registration fee. Use form HHE 804 for fee submission and form HHE 805 for (each) x-ray machine data.
  2. Inform the Radiation Control Program where the unit will be used and how long the unit will be in Maine,
  3. Have the x-ray equipment inspected by a Qualified Expert within 30 days of entering the state. A copy of this report must be sent to the Radiation Control Program, any areas of non-compliance must be repaired/adjusted within 60 days and a copy of the service representative's report sent to the Radiation Control Program.
  4. If the unit is to be used for less than 30 days in Maine, an inspection report performed by an outside inspector must be submitted to the Radiation Control Program.

Please contact the agency at the number below or at the following e-mail address:

Radiation.DHHS@Maine.gov


FOR ADDITIONAL INFORMATION CALL THE RADIATION CONTROL PROGRAM AT:
207-287-5676