Machine Tool
Career Cluster: Architecture, Construction & Manufacturing
Resources for Students
The Machine Tool program prepares individuals in the application of technical knowledge and skills to plan, manufacture, assemble, test, and repair parts, mechanisms, machines, and structures in which materials are cast, formed, shaped, molded, heat treated, cut, twisted, pressed, fused, stamped or worked.
Student Success Planning Guide
This Student Career Planning Guide is organized by career clusters identified by the States’ Career Clusters Initiative (http://careerclusters.org/16clusters.cfm) and by MDOE CTE; U.S. Dept. of Education National Center for Education Statistics CIP (Classification of Instructional Programs) codes; and by the MACTE and MDOE Tech Groups.
Occupations Relating to this Career Cluster: (also available online at http://www.onetonline.org/find/career?c=13&g=Go)
|
Architect |
Equipment Designer |
Concrete Finisher |
|
Building Code Official |
Environmental Engineer |
Construction Engineer |
|
Building Designer |
Fire Prevention and Protection Engineer |
Construction Foreman/Manager |
|
Civil Engineer |
Industrial Engineer |
Construction Inspector and Material |
|
Code Official |
Interior Designer |
General Contractor/Builder |
|
Cost Estimator |
Landscape Architect |
Heating, Ventilation, Air Conditioning and Refrigeration Mechanic |
|
Drafter |
Materials Engineer |
Mason |
|
Electrical Engineer |
Mechanical Engineer |
Painter |
|
Electronic Engineer |
Regional and Urban Planner/Designer |
Paperhanger |
|
Environmental |
Safety Director |
Plumber |
|
Contractor |
Specification Writer |
Project Estimator |
|
Design Builder |
Structural Engineer |
Project Inspector |
|
Drywall Installer |
Surveying and Mapping Technician |
Project Manager |
|
Electrician |
Carpenter |
Roofer |
|
Electronic Systems Technician |
Code Official |
Safety Director |
Approved Secondary Machine Tool Programs (Centers and Location)
Resources for Educators
Standards and Competencies / Competency Record Forms
Approved standards for this tech group:
- National Institute of Metalworking Skills (NIMS)
Machining Level 1 Standards and Competencies - PDF | MS Word
Machining Level 1 Student Competency Record - PDF E-Form | MS Word
2/17/12
Many of the documents on this website are in PDF format. In order to view these materials, you will need the Adobe Acrobat Reader installed on your computer. If you do not currently have this software on your computer, or would like to upgrade to a more recent version of Reader, click on the icon below for the free download. This is a safe and quick upgrade directly from Adobe.
