SafetyWorks! June Safety Classes

May 28, 2024

Dear Employer,

Workplace safety and labor law requirements can seem complex - join the Maine Department of Labor for no-cost upcoming trainings!

Upcoming classes:

Confined Space Entry - General Industry -

June 4, 2024 I 8:30 a.m. 12:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta A confined space has limited or restrictive openings for assessing the space and is not meant for continuous use by workers. OSHA uses the term "permit-required confined space" (permit-space) to describe a confined space in which workers are exposed to serious hazards within a confined space. Employers must be able to determine if a confined space is permit-required. In this half-day course, attendees will learn how to evaluate confined spaces, monitor them during use, and set up rescue procedures.

Work Zone Safety -

May 10, 2024 I 8:30 a.m. 12:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta Private companies and public agencies that work on public roads must follow the traffic control standards of the Manual on Uniform Traffic Control Devices (MUTCD). This hands-on, half-day workshop covers the MUTCD standards and use of cones, signs, flags, and paddles.

Confined Space Rescue Planning General Industry & Construction -

June 6, 2024 I 8:30 a.m. 3:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta This six-hour classroom presentation will include a review of the rescue requirements found in 1910.146 Permit-required Confined Spaces in Section K, Rescue and Emergency services from 1926.1200, and Confined Spaces in Construction in Section 1211, Rescue. Planning for rescue includes identification and classification of spaces, hazard identification, elimination and control, training, and equipment. It also includes site/space-specific procedures (SOPs) and checklists as well as training and exercises. A review of the highlights of Chapter 10, Rescue in NFPA 350, a guide for safe confined-space entry, and of Chapter 5, Confined Space Rescue in NFPA 1670 will also be presented.

Establishing or Improving Your Safety and Health Committee -

June 11, 2024 I 8:30 a.m. 3:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta This one-day class will assist in establishing or improving your safety committee. This class will give you the skills to put a dynamic committee together or strengthen the work of existing teams. It will provide models for hazard assessment, incident investigation, "near-miss" reporting, OSHA regulations, facility inspections and required training. It will help you analyze the strengths and weaknesses of your program and give you a game plan for greater success.

Wage & Hour Compliance -

June 12, 2024 I 9:00 a.m. 12:00 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta This course is designed for human resource or benefits professionals, accountants, business owners, managers, or payroll supervisors. Labor laws can be complex. This seminar covers wage and hour laws, including minimum wage, overtime, youth employment, severance pay, equal pay, rest breaks, leave requirements (earned paid leave, family medical leave, family sick leave and leave for victims of violence). This class addresses commonly asked labor-related questions.

Van Safety -

June 13, 2024 I 8:30 a.m. 12:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta This course emphasizes the issues and concerns related to passenger van operation and appropriate defensive driving techniques to reduce the potential for property damage, injury, or death. You will also learn about motor vehicle laws and resources for teaching traffic safety awareness.

Machine Guarding -

May 17, 2024 I 8:30 a.m. 12:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta Musculoskeletal (MSK) injuries can be a challenge to recognize as they often come on gradually from repetitive use. Other times these injuries are related to a sprain or strain. In any event, MSKs make up most injuries we see in the workplace. In this session you will learn: The importance of matching employee fitness to the essential physical demands of a job; Evaluate a job looking to prevent MSK risks; How to successfully develop and implement a custom workplace stretching and strengthening program that improves flexibility and reduces strain and strain severity and incidence; To properly respond to employees' early symptoms and provide effective first aid intervention that alleviates fear, prevents a disability mindset, and promotes recovery.

Public Sector Compliance -

June 14, 2024 I 8:30 a.m. 12:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta Participants in this half-day class will learn about the standards for metal and woodworking machines, as well as various machine-guarding techniques. We will apply basic guarding practices when specific issues aren't covered in the regulation. OSHA Subpart O will be covered.

Safety & Health Management Systems -

June 20, 2024 I 8:30 a.m. 4:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta Successful safety and health programs are more than just compliance with the OSHA standards. Injuries and illnesses are reduced when employers possess common elements to identify and address safety and health hazards. This course outlines roles and responsibilities, common principles, required functions and programs of a successful safety and health management system. This course prepares organizations who would like to pursue SHARP/SHAPE.

Developing & Conducting Assessments, Audits, and Inspections

June 21, 2024 I 8:30 a.m. 12:30 p.m. SafetyWorks! Training Institute, 45 Commerce Drive, Augusta Identifying and analyzing hazards are key elements to an effective safety and health system. This training explores the methods to assess the workplace for hazards and implement controls to effectively control them. This half-day course looks at PPE assessment, behavioral and program audits, as well as equipment-specific and facility inspections.

Register and browse more SafetyWorks! classes: https://www.safetyworksmaine.gov/training/scheduled_classes/register.shtml

SafetyWorks! is also a host site for the Region 1 OSHA Training Institute Education Center. The next class will be:

June 17, 2024 470 Electrical Safe Work Practices & Update to NFPA 70E

June 18, 2024 7115 Lockout/Tagout

June 25-28, 2024 2264 Permit Required Confined Space Rescue

To register go to https://oshaedne.com/osha-470/ or https://oshaedne.com/osha-7115/ or https://oshaedne.com/osha-2264/, or call 800-449-6742. Please note, these classes have a registration fee to attend.

If you have questions about safety or upcoming classes, reach out to SafetyWorks! at 1-877-SAFE-345 or general.bls-safetyworks@maine.gov.

If you have questions about Wage and Hour compliance, please reach out to the Wage and Hour Division at 207-623-7900 or bls.mdol@maine.gov, or visit www.maine.gov/labor/bls/.

Thank you,

The Maine Department of Labor